Wood/Log/Timber Transport Semi Trailer for Sale in Nigeria

The customer saw our flatbed semi trailer locally and liked this semi-trailer very much. So Nigeria customer found TITAN and customized wood transport semi trailer. After determining the size and other details of the timber transport trailer, TITAN confirmed the drawing of the log transport semi trailer with the Nigeria customer. And factory successfully completed the order after receiving the order. 

As a relatively well-known brand, TITAN will strictly control the production and quality of TITAN trailers, and strive to provide customers with the most cost-effective semi-trailers.

Package of Wood/Log/Timber Transport Semi Trailer for Sale

Timber semi trailer is used for the log, timber, wood transportation. It  meets all requirements of the timber industry regarding individual securing, high payload and flexible transport technology.

Tri types of paint technology for wood/log/timber transport semi trailer:

1. Traditional spray paint:

The advantages of traditional spray paint are simple process and low cost.

However, the shortcomings are also obvious. The paint surface has not strong adhesion and is easy to fall off. The thickness of the construction is difficult to reach the standard thickness. The spraying surface is prone to dead spots.

For spray painting, it must be sandblasted before construction, especially for welding parts. The paint surface directly covers the welding slag and dust, which will easily cause the paint to fall off. In the choice of paint, one needs to use polyester paint or fluorocarbon paint. Ordinary paint can not reach the open-air operation and the required corrosion resistance standard.

Details of Wood Transport Semi Trailer for Sale

2. Electrophoretic primer + spray paint:

This process makes up for the shortcomings of insufficient thickness of colored electrophoretic paint films. But also faces the problems of traditional spray paint on the topcoat, the most prominent of which is the prone to dead spots, the thickness of the paint surface is uneven and it is difficult to control a reasonable thickness.

3. Electrophoretic primer + dusting:

This process is based on electrophoresis, through the corona discharge, the topcoat powder is evenly adhered to the body, and then the topcoat is formed by melting at high temperature.

Its advantages just make up for the shortcomings of spray paint, it can form a standard 60 ~ 120μm top coat thickness in a balanced manner, there will be no dead corners when sprayed, the paint surface has no flow marks, and its adhesion is much stronger than spray paint.

In terms of corrosion resistance, the powder spray paint surface has no change in salt spray resistance for 1000hr, and no humidity and heat resistance for 500hr. There should be no bubbles or rust in salt spray, 5% salt water at 35 degrees Celsius, and continuous spray for 400 hours without change.

Many drivers will think that the wood transport semi trailer paint is more beautiful and has little effect on the use of the vehicle. However, the service life of the vehicle will always decrease quickly from an angle that we cannot see with the naked eye.

Thus, we must pay attention to the maintenance of the vehicle. The paint on the trailer is not just for the sake of good-looking. I hope it can attract the attention of friends.